Titanium Enamelled Steel Boiler
Environmentally friendly gas R134A
Operating range in heat pump mode with air temperatures from -5°C to 42°C
Condenser is wrapped around the boiler (not immersed in water)
Low noise emissions (silent mode)
Active Anode (Protech) + Magnesium Anode
LCD Display
Indoor Vertical Installation
Max temperature obtained using the heat pump mode: 53°C (in Factory Setting mode)
Max temperature obtained using the heating element: 65°C (in Factory Setting mode)
Modes: Green, Auto, Boost, Voyage
Anti-Legionella / Bacterial Function
Heating Time to reach 53°C using Heat Pump - 5Hr 35min (with an external air temperature of 7°C, relative humidity at 87%, Inlet Water Temperature of 10°C
Heating Element Power: 1200W
Energy Class: A+
Anti-Legionella/Bacteria Function
If activated, the water heater automatically carries out the anti-legionella disease protection function. The water is heated to a temperature of 65°C on a monthly basis for a maximum time of 15 minutes, so as to avoid germs from developing in the water tank and piping. The first heating cycle is performed 3 days after the function has been activated.
Auto Mode
The water heater understands how to reach the desired temperature in a few hours, through the rational use of the heat pump, and only if necessary, of the heating element
Boost Mode
The water heater simultaneously uses the heat pump and heating element to reach the desired temperature in the shortest possible time. Once the temperature is reached, the AUTO operating mode is restored.
Green Mode
The water heater will use the heat pump, thereby ensuring maximum energy saving! The heating element may turn on only in the event that occurs inhibition of operation of the heat pump (errors, air temperature out of operating range, defrosting process in progress, anti-legionella function). This function is recommended for air temperatures above 0°C during the hours of heating.
Programming Function
This function is to be activated through the installer menu. The two programs P1 and P2 may act either individually or in combination with each other during the day. The device will be able to activate the heating phase to reach the selected temperature set in the timetable, giving priority to heating using the heat pump and if necessary it uses the heating element.
Voyage
This function is to be activated through the installer menu. This mode allows the user to program the number of days of absence, during which the water heater will remain turned off, the product will start to work in AUTO mode on the day of arrival.
The price includes the price for the appliance, hydraulic non-return safety valve, installation and 2 yearly maintenance services where during each maintenance service, the Service Engineer will perform a cleaning service of the evaporator to remove any dust or obstructions, replacement of the Magnesium Anode, cleaning of the heating element from any limescale that forms over time, ensure the grill is perfectly clean and make sure that the condensate drain pipe is not obstructed.
Click here to download brochure
